Barracuda Networks 4 Especificaciones Pagina 29

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 92
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 28
Administrator’s Guide
Advanced installation topics 29
Figure 2.6: Proxy Behind the Barracuda Web Filter
2. Connect the Ethernet cable from your WAN port of your proxy server to the LAN port on the
front panel of the Barracuda Web Filter.
Note:
A crossover cable may be needed if your corporate firewall does not have a switchable
port and therefore cannot switch between RX and TX. Another solution is to place a switch
between the corporate firewall and the Barracuda Web Filter.
Note:
You do not need to configure the WAN port. The Barracuda Web Filter creates an
Ethernet bridge between the WAN and LAN ports.
3. Connect an Ethernet cable from the WAN port on the Barracuda Web Filter to the LAN port on
your firewall.
4. Select BASIC > IP Configuration page in the administration interface, and set the Operating
Mode setting to Active
Vista de pagina 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 91 92

Comentarios a estos manuales

Sin comentarios