Barracuda Networks 4 Especificaciones descargar pdf (Pagina 25)

Administrator’s Guide

Installing and configuring the Barracuda Web Filter 25

Figure 2.4: Connecting the Barracuda Web Filter to your Network

2. Connect an Ethernet cable from the LAN port on the Barracuda Web Filter to your internal

network switch Uplink port (if one is available).

Note:

If your switch records the MAC address of an external device, make sure you delete all

pre-existing MAC address records from your switch.

3. Select BASIC > IP Configuration page in the administration interface, and set the Operating

Mode setting to Active.

Note:

A hard bypass feature is available on the Barracuda Web Filter 310 and higher models.

4. If necessary, set up static routes on the BASIC > IP Configuration page. Setting up static routes is

often necessary in complex networks so the Barracuda Web Filter knows the proper way to route

traffic on your network.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 91 92

Sin comentarios

Barracuda Networks 4 Especificaciones Pagina 25